Affiliation
a Kemerovo State University
Copyright ©Borodulin et al. This is an open access article distributed under the terms of the Creative Commons Attribution 4.0. (
http://creativecommons.org/licenses/by/4.0/), allowing third parties to copy and redistribute the material in any medium or format and to remix, transform, and build upon the material for any purpose, even commercially, provided the original work is properly cited and states its license.
Abstract
A method of modeling the continuous process of the mixing of bulk materials on the basis of cybernetic analysis with some elements of automatic control theory (ACT) [
6,
9] has been considered. In this case, a mixing unit (MU) is represented in the form of a dynamic system, which is characterized by the known topology of the motion of material flows and subjected to various external disturbances.
The two developed mathematical models allow us to determine the degree of the smoothening of input material flow fluctuations from volumetric dosers by the mixers incorporated into a MU. The obtained numerical values of smoothability indicate that it is reasonable to equip the studied mixers of new design with volumetric dosers. This allows us to meet the requirements to MUs from both the engineering and economical viewpoints.
Keywords
centrifugal mixer,
time-and-frequency analysis,
bulk materials,
combined food products,
modeling,
cybernetic analysis
REFERENCES
- Akhmadiev, F.G. and Aleksandrovskii, A.A., Modelirovanie i realizatsiya sposobov prigotovleniya smesei (Modeling and implementation of mixture preparation methods), Zhurnal Vsesoyuznogo Khimicheskogo Obshchestva imeni D.I. Mendeleeva (Journal of All-Union Mendeleev Chemical Society), 1988, vol. 33, no. 4, p. 448.
- Borodulin, D.M. and Ivanets, V.N., Razvitie smesitel’nogo oborudovaniya tsentrobezhnogo tipa dlya polycheniya sukhikh i uvlazhnennykh kombinirovannykh produktov (Development of Centrifugal Mixing Equipment for the Preparation of Dry and Wetted Combined Food Products), Kemerovo: KemTIPP, 2012.
- Gel’man, M.I. and Kirsanova, N.V., Praktikum po fizicheskoi khimii. Uchebnoe posobie (Workshop on Physical Chemistry: Tutorials), St. Petersburg: Lan’, 2004.
- Ivanets, V.N., Smesiteli poroshkoobraznykh materialov dlya vitaminizatsii pishchevykh i kormovykh productov (Mixers of powder-like materials for the vitaminization of food and fodder products), Izvestiya Vysshikh Uchebnykh Zavedenii. Pishchevaya Tekhnologiya (News of Institutes of Higher Education. Food Technology), 1988, no. 1, pp.89-97.
- Ivanets, V.N. and Poznyakovskii, V.M., Gigienicheskie aspekty, tekhnologiya, i apparaturnoe oformlenie vitaminizatsii pishchevykh produktov (Hygienic Aspects, Technology, and Equipment Implementation of Food Product Vitaminization), Kemerovo: KemTIPP, 1991.
- Ivanets, V.N. and Fedosenkov, B.A., Protsessy dozirovaniya sypuchikh materialov v smeseprigotovitel’nykh agregatakh nepreryvnogo deistviya: obobshchennaya teoriya i analiz (Bulk Material Dosing Processes in Continuous Mixture Preparing Units: Generalized Theory and Analysis), Kemerovo: KemTIPP, 2002.
- Ivanets, V.N., Zhukov, A.N., and Borodulin, D.M., Analiz chastotno-vremennykh kharakteristik smesitelya nepreryvnogo deistviya tsentrobezhnogo tipa (Analysis of the time-and-frequency characteristics of a continuous centrifugal mixer), Khranenie i Pererabotka Sel’khozsyr’ya (Storage and Processing of Farm Products), 2004, no. 2, pp. 52-54.
- Kafarov, V.V. and Dorokhov, I.N. Sistemnyi analiz protsessov khimicheskoi Tekhnologii (System Analysis of Chemical Engineering Processes), Moscow: Nauka, 1976.
- Lazareva, T.Ya. and Martem’yanov, Yu.F., Osnovy teorii avtomaticheskogo upravleniya. Uchebnoe posobie (Foundations of Automatic Control Theory: Textbook), Tambov: Izd. Tambov. Gos. Univ., 2004.
- Makarov, Yu.I., Apparaty dlya smesheniya sypuchikh materialov (Apparatuses for the Mixing of Bulk Materials), Moscow: Mashinostroenie, 1973.
- RF Patent 2361653, Byull. Izobret., 2009, no 20.
- RF Patent 2207186, Byull. Izobret., 2003, no. 18.
- Dehling, H.G., Hoffmann, A.C., and Stuut, H.W., Stochastic models for transport in a fluidized bed, SIAM Journal on Applied Mathematics, 1999, vol. 60, no. 1, r. 337-358.
- Hoffmann, A.C. and Paarhuis, H.I., A study of the particle residence time distribution in continuous fluidized beds, Institution of Chemical Engineers Symposium Series, 1990, vol. 121, r. 37-49.
- Salahudeen, S.A. and AlOthman, O., Optimization of rotor speed based on stretching, efficiency, and viscous heating in nonintermeshing internal batch mixer: simulation and experimental verification, Journal of Applied Polymer Science, 2013, vol. 127, no. 4, pp. 2739-2748.
